High voltage, low current, accurate testing.
Leak current, test time continuously arbitrary set; strong adaptability.
Simultaneously display tested actual value(time, voltage, current); disqualification sound-light alarm.
Manual, remote control testing.
HV breakdown protection.
1. Time display: three digit tube display; max time up to 999s; min time of 0.1s.
2. Time preset: button preset time instead of drive plate.
3. Time counting method
When set time is 0, testing adopts counting up method; if set time is not 0, it adopts counting down method. The time of traditional type will not count time if the timing is not on.
4. Output port voltage indicator light
The “Danger” indicator light indicates HV output port output voltage state. Only if there is high voltage in HV port, Danger indicator light will be lightening. This light will not be controlled by control circuit.
This is for ensuring the safety of operator. If the relay is broken, which controls the output high voltage in the control circuit, there probably always is HV output in HV port, if without any indication, the operator may get an electric shock.
5. PLC connector
The output signal in PLC connector of the equipment is all contact point signal; its output signal is stable and easy to catch. While as for the output PLC signal of traditional type, its PASS signal is pulse signal which is not easy to catch.
Output voltage range
Max output power
Max rated current
2mA, 20mA, 100mA
Output waveform distortion
0.0s~999s 0.0=continuous test
Root mean square value
2mA grade: 1uA
20mA grade: 10uA
50mA grade: 0.1mA
No. 1, Jianlong N. Rd., Jiulongpo District,Jiulong Industrial Park, Chongqing, China